960H Family of Communication Handsets
960HC - Base handset with built in speaker, conference microphone, desk or wall mountable, intercom facility, power/busy LED.
960HT - This includes tone encoding from the keyboard and a single decode function giving audible and visual alarm.
960HA - This includes a 5 tone keypad and 3 digit A.N.I. decoding. A queue of 4 calls can be recalled by scrolling the display. 'Status' is also provided. Audible warning is given on a successful decode.
Status messages displayed with A.N.I.
"Base Busy" feature available for community base operations. (This works in conjunction with host 920 unit)
Cross muting facilities to other handsets. Optional control by 'E' (Mute) lead.
Fully compatible with the Omnitronics 900 Communication Series.
Common reset on selcal units allows several handsets to have the same decode address using the same 920 RCI
External speaker connection available (1 watt)
Individual trim pots for setting up earphone level and conference microphone.
Calls can be recalled by scrolling the display. 'Status' is also provided. Audible warning is given on a successful decode.
The 960HT uses the Sigtec S1516 5 tone module and is programmed via a P.C. using the Sigtec P9932 programmer. All popular 5 tone standards are available.
The 960HA uses the Omnitronics 965 ANI module and is programmed using a P.C. with the Omnitronics OM3 programmer. All popular standards are supported.
These include Tone Period 20 - 100ms
Tone Set 8 tone sets available
Tone Format 5 tone, 5 tone and status and 6 tone.
The 960H communication handsets connect to the Telecom private lines via the Omnitronics Austel approved 920D or 920T remote control interface. Power for the handset is derived from the interface.
For local control, use the Omnitronics 935 local radio interface. The power for the handset (12Vdc nominal) is then derived from the radio supply.