960C Family of Communication Consoles
Model 960CC Basic version with inbuilt loudspeaker, electrical microphone, LED level meter, intercom, mute control and rear connections for headset, desk mic and foot switch.
960CN Includes 5 tone Selcal key pad and non predictive decoding with audible and visual alarms.
960CT Includes 5 tone Selcal key pad, single decode add.
960CA Includes 5 tone Selcal key pad A.N.I. display, queuing, clock and printer output
Main Selcal and A.N.I. parameters on the 'CA' version programmable via the keyboard.
Fully compatible with Omnitronics 900 Series of communication peripherals.
RS232 port for printer or computer connection. Date stamps incoming and outgoing calls.
"Emergency" display on the 'CA' version.
Provision for an extension Handset (960H Type).
Comes with audible and visual alarms
The 'CT' version uses the Sigtec 'S1516' tone module which can be programmed using the Sigtec P9932 programmer in conjunction with a P.C. All popular variations for tone encoding and decoding are available. The 'CN' and 'CA' versions use the Omnitronics 965 ANI module. Again, programming is done via a P.C. using the Omnitronics OM3 programmer, with all the common standards catered for.
These include Tone Period 20 - 100ms
Tone Set 8 tone sets are available
Tone Format 5 tone, 5 tone plus status, 6 tone
The 960C communication consoles connect to Telecom private lines via the Austel approved Omnitronics 920D or 920T remote control interface. Power for the console is derived from that interface. For local control, use the Omnitronics 935 local radio interface. The power for the console (12 Vdc nominal) is then derived from the radio supply.