934 Peripheral Interface
Bridging The Gap In Radio Communications


The new 934PI solves the problem of interfacing between 900 Series Equipment and the 619 Audio Bridge or the 9412 AMU. It will also connect to any other 4-wire + E&M signalling device via either port.

Separate 8-way ports allow direct connection to either the 619 Audio Bridge or the 9412AMU. The 6-way port connects to the peripheral (either 920D/T or 960C handset port) and a 4-way port allows for control of the intercom function and the console muting facility.

The unit is fully approved to the TS001 standard. This allows for any non-approved audio equipment to be interfaced into PABX networks. It provides isolated 600ohm balanced 4-wire audio lines and bi-directional relay contact control lines. Four internal links allow the unit to be configured to suit a range of different equipment. These link settings cover:


Omnitronics Green Ball Bullet Point CROSS MUTE - for connection of multiple 900 Series Equipment

Omnitronics Green Ball Bullet Point PTT SEL - for high or low PTT output phase

Omnitronics Green Ball Bullet Point HOLD - to convert pulsing busy signal to a steady state (i.e. 950 Radio Management System)

Omnitronics Green Ball Bullet Point TERM - sets input impedance (high or 600 ohms)


The unit is supplied in a small "Jiffy box" enclosure (130x67x46mm), with mounting hardware and interface cables provided. It is factory configured for the most common applications and as it has no operator controls or indicators, it can be easily mounted out of sight.



FEATURES

Omnitronics Green Ball Bullet Point Easy to set up.

Omnitronics Green Ball Bullet Point Provides simple interface between equipment.

Omnitronics Green Ball Bullet Point Plug compatible with the 900 Communication Series, the 619 Audio Bridge and the 9412 Audio Management Unit.



TYPICAL APPLICATIONS

Omnitronics Green Ball Bullet Point Interfacing 9412AMU into a 950 system (via 960C handset port).

Omnitronics Green Ball Bullet Point Adding a handset or console to a 619EI/GI for monitoring.

Omnitronics Green Ball Bullet Point Connecting 900 series into 4-wire + E&M lines.


For further information on the Omnitronics 934 Peripheral Interface, please do not hesitate to e-mail us at :

sales@elco-electronics.com

[Return to Home Page] [Contact Us] [Download]